Senin, 18 April 2016

First Parts Completed Post Mortem

As I mentioned in the previous post, I wanted to use the first parts as a learning tool to fine tune my process for creating the frame parts. Unfortunately, one of the smaller parts was cut too close to the line and ended up being unusable.Lesson Learned #1 - Insure that you have adequate lighting when cutting out the parts.Although I knew that I had to cut away from the line outlining the frame,

Related Posts by Categories

0 komentar:

Posting Komentar

Catatan: Hanya anggota dari blog ini yang dapat mengirim komentar.